Power Quality - ESTEEM systems
offer state of the Art conditioning. The output waveform
is pure sine wave with distortion level of less than 2%.
Superior dynamic regulation, best static regulation, capability
to clear branch circuit fuses. Capability to cater to
nonlinear loads. The systems are microprocessor controlled
employing dual processor.
2
Power Rating - The ESTEEM UPSs are designed
for full power rating that means, ESTEEMs UPS is designed
for rated KW & KVA ratings. The UPSs offered are at
unity power factor designs, which means availability of
extra power per KVA, and that to at 450ambient conditions.
3
High efficiency - The overall efficiency
of ESTEEM Systems is very high, hence it reduces cost,
and reduces recurring expenditure. The high overall efficiency
is available even with Double conversion True Online Technology.
This is very important.
4
The output Isolation transformer - ESTEEM
UPSs are provided with output Isolation transformer. ESTEEM
believes that in Indian power conditions the galvanic
isolation of input power and output power is a must. The
neutral conductors getting opened is the common phenomena
observed. If the neutral conductor is common (as in delta
conversion based systems where the isolation transformer
is not used at all) this phenomenon may cause serious
problem to the load side. Another source of catastrophe,
which can lead to disaster, is lightening. Lightening
has serious impact on raising the ground potentials to
the disastrous levels. This causes permanent damage to
the loads. The only remedy is to have a total galvanic
isolation of input and output supply.
5
Accessories - The accessories like battery
circuit breaker for battery maintenance. The monitoring
software, UPS to battery cables is the integral part of
ESTEEM Systems made available at no extra cost.
6
Total Power Protection - Multiple power
protections such as output over and output high low voltage,
output distortion, output short circuits are the part
of ESTEEM design.
